- alu@haomeicn.com
- +86 135 9841 7520
5182 aluminum alloy can lid material is mainly used for making ring-pull can/ring-pull can/ring-pull can and pull rings of all green pull cans and tin cans. Aluminum cans are light, heat-resistant, conductive, odorless, non-toxic, printing effect is good, recyclable and so on. 5182-h19 aluminum sheet/coil is the perfect material commonly used for can lids. H19 tempered 5182 aluminum alloy has the characteristics of light weight, heat resistance, odorless and non-toxic, good printing effect, high recovery rate, etc. It is widely used in beer and beverage packaging cans. "The 5182 aluminum twist off lid sheet developed by haomei Aluminum, has good strength and formability, ensures high sealing performance. "
5182 aluminum alloy is the main alloy for pulling ring material. The bottom of the tank mainly uses 3004, 5052 and so on. These alloys are not only used to make all-aluminum can, but also widely used for tin cans and other packaging containers. With the development of beverage industry and the replacement of old packaging materials, 5182 aluminum alloy will be more widely used in the packaging market.
At the same time, as a high magnesium alloy, 5182 is NON-HEAT-TREATMENT alloy, with good strength, corrosion resistance, good machinability and other characteristics, can also be used to manufacture aircraft fuel tanks, tubing, traffic vehicles, ship sheet metal and so on.
Specs of twist off lid sheet:
| Alloy | 8011 5182 |
| Temper | H14, H16 |
| Thickness | 0.20-0.25mm |
| Width | 500-1000mm |
| Length | 500-1000mm |
Size and deviations from the size
| Thickness tolerance | -0+0.5mm |
| Width tolerance | -0+0.5mm |
| Length tolerance | -0+0.5mm |
Deviations of the forms/shapes:
| Deviations of the straight for hardness of the longitudinal border | max 1mm |
| Deviation of flatness | max 4mm |
| Rectangularity: max difference in the diagonals | 3mm |
| Dislocation between the sheets | max 2mm |
Surface of the sheets
Available Surface types
Mechanical data:
| Resistance to stretching Rm | Min 180 Mpa Max 220 Mpa |
| Yield strength Rpop | Min 145Mpa |
| Elongation | Min 2% |
Plain mill finish
DOS oil lubricated finish
Chromated finish
One side golden/white/red/blue/black etc. other side protective lacquered
Both sides clear/transparent lacquered
Typical closure application: Aluminum twist off lid.
To ensure that the surface of the 5182 aluminum sheet/plate is intact without scratches, we will clamp paper and cover film on the 5182 aluminum sheet/plate.
The plastic or kraft paper package is used for moisture-proof and rainproof to ensure that the 5182 aluminum plate is clean and free from dirt during transportation.
We add wooden support and reinforce it with a steel belt to avoid collision during transportation and ensure the shape of the 5182 aluminum plate is unchanged;
Export products are all packaged in wooden cases and brackets marked with fumigation.
